Sony CCP-8000 Series User Manual page 267

4
To make the mosaic like a relief pattern
1
2
Defocusing
1
2
Notes
If defocus is enabled, and in the <Mosaic/Defocus Mode> group you select
Video/Key, then the crop and mask are disabled.
Applying a mask to mosaic or defocus
1
266
Resizer
Notes
If mosaic is enabled, and in the <Mosaic/Defocus Mode> group you select
Video/Key, then the crop and mask are disabled.
Set the parameters.
Knob Parameter Adjustment
1 H Horizontal defocusing
2 V Vertical defocusing
3 All Horizontal and vertical defocusing H value shown
With [Mosaic] on, press [Relief], turning it on.
In addition to the mosaic parameters, set the following parameters.
Knob Parameter Adjustment
3 Gain Relief depth of mosaic cells
4 Angle Light source direction
In the M/E-1 >Key1 >Processed Key >Enhanced Effect menu, press
[Defocus], turning it on.
Set the parameters.
This operation is the same as the defocusing setting when using the DME
with the DME dedicated interface.
However, <Mosaic/Defocus Mode> appears in place of <Defocus Mode>.
For more details, see "Defocus Settings" in Chapter 11 (Volume 2).
In the M/E-1 >Key1 >Processed Key >Enhanced Effect menu, press [Dual
Rszr Effect], turning it on.
Setting values
0.00 to 100.00
0.00 to 100.00
Setting values
0.00 to 100.00
–8.00 to +8.00