Auxiliary Bus Control Block (For Aux Buses) - Sony CCP-8000 Series User Manual

Auxiliary Bus Control Block (for AUX Buses)

There are also models without the selected
source name displays and source name
displays shown in the following figure.
1 AUX delegation buttons
5 Cross-point buttons
2nd
1st
9 Source name displays
a AUX delegation buttons
Press one of these buttons, turning it on, to
select the bus to which to assign the cross-
point buttons in the auxiliary bus control
block.
All operations except those of the [DEST]
button and [SHIFT] button are the same as
for a model with selected source name
displays and source name displays.
2 Selected source name displays
3 DEST button
0 SHIFT button
6 XPT HOLD buttons
4 Selected bus display
For buses that can be selected, see "Bus
Selection" (page 135).
Names and Functions of Parts of the Control Panel
7 KEY button
8 2ND button
qa RTR button
qs Level selection buttons
77