Table of Contents
Advertisement
a PROGRAM bus selection button row
See descriptions for the BKDF-901 in "PROGRAM
selection button row" and "About the SHIFT buttons"
(page 15).
b PRESET bus selection button row
See descriptions for the BKDF-901 in "PRESET selection
button row" and "About the SHIFT buttons" (page 15).
c M/E buttons
Select the M/E program video created with the M/E
Cross-Point Bus Block as background video.
6 PROGRAM/PRESET Transition
Block
This block allows you to set up and execute transitions of
program/preset video.
1 Transition type selection buttons
3 Transition execution block
24
BKDF-902 1.5M/E Control Panel
2 Transition range and direction
buttons
1PROGRAM bus selection button row
2PRESET bus selection button row
3M/E buttons
a Transition type selection buttons
MIX button: Press this button, lighting it, to select a mix
transition. The Rate menu appears in the display panel,
allowing you to specify the transition rate.
WIPE button: Press this button, lighting it, to select a
wipe transition. The P/P Wipe Pattern menu appears in
the display panel, allowing you to select the wipe
pattern.
b Transition range and direction buttons
FADER LIMIT button: Limits the effective range of the
fader lever. The range limitation is enabled when this
button is pressed, lighting it. When you press the
button twice to turn it on, the Fader Limit menu
appears in the display panel. This menu allows you to
specify the effective range of the fader lever as a
percentage value.
NOR/REV (normal/reverse) button: Press this button,
lighting it, to reverse the direction of the transition
each time a transition is executed.
REV (reverse) button: Press this button, lighting it, to
execute a transition in the reverse direction.
c Transition execution block
See descriptions for the BKDF-901 in "Transition
execution block" (page 16).
7 DSK (Downstream Key)/Fade to
Black Control Block
This block allows you to set up and execute downstream
keying and fade to black.
Advertisement
Table of Contents
