Registering Menus As Favorites; Linking A Control Panel With The Menu - Sony XVS-G1 User Manual

Registering Menus as
Favorites
You can register frequently used menus or other menus as
"favorites."
A favorite menu can be recalled by pressing a shortcut
button displayed in the [Favorites] taskbar.
Notes
• Up to 100 shortcut buttons can be registered in the
[Favorites] taskbar.
• Shortcut buttons are displayed in the order they were
registered from the left.
1
Display the target menu to register.
2
Press the taskbar selection button and select
[Favorites] from the pull-down list.
The taskbar area switches to the [Favorites] taskbar
display.
3
Press the register favorite button.
The currently displayed menu is registered as a
favorite menu and a shortcut button is added to the
[Favorites] taskbar.
To cancel a registered favorite menu
Display the target menu to cancel and press the register
favorite button to set it to the off state.
To register using the menu number button
The register favorite button is also displayed in the
numeric keypad window displayed when the menu
number button in the header area is pressed.
You can register/cancel a favorite menu in the same way
as with the register favorite button in the [Favorites]
taskbar.
Register favorite button
76
Linking a Control Panel
with the Menu
You can set a menu to operate by linking it with an
operation from a control panel.
Multiple web menu sessions can be connected
simultaneously, but only one web menu session can be
linked to an operation from a control panel.
The following control panel operations are link targets.
• Setting a parameter in the utility control block in menu
parameter operation mode
• Setting a parameter in the device control block in menu
parameter operation mode
• Recalling a menu by double-pressing a control panel
button
• Menu shortcut functions of the memory recall buttons
in the utility/shotbox control block, memory recall
buttons in the utility control block, and cross-point
buttons in the cross-point control block
Panel link button
1
Press the panel link button in the header area.
The connected control panel and the link icon are
displayed on the panel link button.
2
Check the message, then press [OK].
The control panel link is set and the link icon turns
light blue.
Note
If a control panel link is set while the control panel is
linked to another menu session, the other menu link is
canceled.
Also, once you set a control panel link, it cannot be
canceled until another menu session is linked to the
same control panel.