Simatic Mobile Reader" App; Starting The App - Siemens SIMATIC Ident RF360M Operating Instructions Manual

"SIMATIC Mobile Reader" app

5.1

Starting the app

After the mobile reader has been switched on and started, the home screen of the operating
system is shown on the display. The "SIMATIC Mobile Reader for RFID" app ("SIMATIC Mobile
Reader" for short) and this manual are stored on the home screen as PDF file. Click on the app
to open it.
Depending on the connected head module, the corresponding app version for the HF
(SIMATIC RF200 and RF300) or UHF (SIMATIC RF600) frequency range is opened. The
functions of the two app versions are described in the following sections.
NOTICE
Allow memory access on first app start
Allow memory access the first time the app is started so that it can save extensions and log
files on the device. Note that it is necessary to allow this in order for the app to start.
Alternatively, you can open the app via the app overview. To open the app overview, you
simply need to swipe from bottom to top in the home screen on the display.
App languages
The app is available in an English and a German version. The app language depends on the
selected language settings of the operating system. You can change these in the operating
system settings under "Settings > System".
Navigation
As usual in Android operating systems, the reader has a 3-button control for navigation at the
bottom edge of the display.
• Arrow symbol (left):
Back button
• Circle symbol (center):
Button to return to the home screen
• Square symbol (right):
Button to open the apps that are still active in the background.
Mobile reader SIMATIC RF360M/RF660M
Operating Instructions, 08/2022, C79000-G8976-C660-02
5
33