Damaged Equipment; Procedure - Brainlab CURVE DUAL DISPLAY Technical User Manual

MAINTENANCE
6.2

Damaged Equipment

6.2.1

Procedure

Discontinue Use
If you discover a defect:
Steps
1.
2.
3.
4.
Do not continue to use equipment that has been found to be defective during an
inspection. Using damaged equipment may cause patient injury.
Required Information
When you contact Brainlab support regarding a defect, you are asked for:
• System serial number on the Monitor Cart type plate
• Component serial number inscribed on the component ( Monitor or Camera Cart)
• A description of the problem
Repair/Replacement
Brainlab support:
• Provides you with a cost estimate for repair or replacement
• Informs you when your system is expected to be operational again (usually within 48 hours)
Return Instructions
Refer to the System User Guide.
Technical User Guide Rev. 1.2 Curve Dual Display, Curve Single Display Ver. 1.0
Switch the system off.
Disconnect the system from mains power.
NOTE: If using wireless camera communication, make sure to also disconnect the Cam-
era Cart - Dual Display from mains power.
Contact Brainlab support.
Place a notice such as "DO NOT USE" on the equipment to prevent inadvertent use.
73