Compliances; Electromagnetic Emissions - Brainlab CURVE DUAL DISPLAY Technical User Manual

COMPLIANCES AND SPECIFICATIONS
5.4

Compliances

5.4.1

Electromagnetic Emissions

Electromagnetic Environment
Curve systems are intended for use in the electromagnetic environment specified in the table
below.
The user is responsible ensuring that the systems are used in such an environment.
Declaration
Guidance and manufacturer's declaration regarding electromagnetic emissions:
Emissions Test
RF emissions CISPR
11
RF emissions CISPR
11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/
flicker emissions IEC
61000-3-3
This system is intended for use by health care professionals only. It may cause radio
interference or disrupt the operation of nearby equipment. It may be necessary to mitigate
its effects by re-orienting or relocating the system or shielding the location.
The system should not be used adjacent to, or in direct contact with other equipment. If
this cannot be avoided, normal operation must be verified in the configuration in which it
will be used.
Technical User Guide Rev. 1.2 Curve Dual Display, Curve Single Display Ver. 1.0
Compliance Electromagnetic Environment - Guidance
The Curve system uses RF energy only for its inter-
nal function. Therefore, its RF emissions are very low
Group 1
and are not likely to cause any interference in nearby
electronic equipment.
Class A
The Curve system is suitable for use in all establish-
ments other than domestic, and may be used in do-
Class A mestic establishments and those directly connected
to the public low-voltage power supply network that
supplies buildings used for domestic purposes, pro-
vided the below warnings are heeded.
Complies
59