Training and Documentation
1.4.2
Documentation
System Revision
The information in this guide is relevant for the system revisions below:
System
Curve Dual Display
Curve Single Display
NOTE: The system serial number is shown on the type plate of the Monitor Cart.
Intended Audience
This user guide is intended for surgeons and hospital staff.
Reading User Guides
The user guides describe complex medical devices and surgical navigation software that must be
used with care.
It is important that all users of the system, instruments and software:
• Read the user guides carefully before handling the equipment
• Have access to the user guides at all times
Disregarding information in the user guides, in particular the disregard of warning and cautions, is
considered to be abnormal use.
How to Use this Guide
The information provided in this guide will help you to determine whether your navigation system
is functioning properly.
Use this guide, in combination with assistance from Brainlab support, to identify and troubleshoot
possible problems.
Do not attempt to service your system. Contact Brainlab support for questions regarding
repair and service.
Available User Guides
User Guide
Software User Guides
Instrument User Guides
Cleaning, Disinfection and
Sterilization Guide
System User Guides
Technical User Guide
NOTE: Not all of the above-mentioned user guides are available or relevant for all Brainlab
products.
14
Revision
System Serial No. (Last Digits)
1.0
SNABCDEFGHI - 19900
1.0
SNABCDEFGHI - 19905
Contents
• Overview of treatment planning and image-guided navigation
• Description of OR system setup
• Detailed software instructions
Detailed instructions on instrument handling
Detailed instructions on cleaning, disinfecting and sterilizing in-
struments
Comprehensive information on system setup
Detailed technical information on the system, including specifica-
tions and compliances
Technical User Guide Rev. 1.2 Curve Dual Display, Curve Single Display Ver. 1.0
Need help?
Do you have a question about the CURVE DUAL DISPLAY and is the answer not in the manual?
Questions and answers