210
Chapter 17—Remote Control
C
TRANSPORT section
This section enables you to control the transport functions on external machines.
• REW............................... This button starts rewind on external machines.
• FF ................................... This button starts fast forward on external machines.
• STOP.............................. This button stops external machines.
• PLAY .............................. This button starts playback on external machines.
• REC................................ This button is used in conjunction with the PLAY button to
D
FRAMES
This parameter selects the timecode frame rate from 24, 25, 30D (drop frame), and 30.
6 To control the transport functions, move the cursor to the desired button in
the TRANSPORT section, then press [ENTER].
7 If you desire, move the cursor to the buttons and parameters in the
LOCATE/TIME section and the TRACK ARMING section, then press the
[ENTER] button or rotate the Parameter wheel to control the transport func-
tions on external machines.
Tip: You can also use the programmed User Defined buttons to control Machine Control func-
tions. (See page 231 for information on assigning functions to the User Defined buttons.)
01V96—Owner's Manual
start recording on external machines.