Yamaha MIXING CONSOLE Owner's Manual page 261

DUAL PITCH
Two input, two output pitch shifter.
Parameter
PITCH 1 –24 to +24 semitones
FINE 1 –50 to +50 cents
LEVEL 1 –100 to +100%
PAN 1 L63 to R63
DELAY 1 0.0–1000.0 ms
FB. G 1 –99 to +99%
PITCH 2 –24 to +24 semitones
FINE 2 –50 to +50 cents
LEVEL 2 –100 to +100%
PAN 2 L63 to R63
DELAY 2 0.0–1000.0 ms
FB. G 2 –99 to +99%
MODE 1–10
SYNC OFF, ON
1
NOTE 1
NOTE 2
1
1.
setting)
ROTARY
One input, two output rotary speaker simulator.
Parameter
ROTATE STOP, START
SPEED SLOW, FAST
SLOW 0.05–10.00 Hz
FAST 0.05–10.00 Hz
DRIVE 0–100
ACCEL 0–10
LOW 0–100
HIGH 0–100
Range
Channel #1 pitch shift
Channel #1 pitch shift fine
Channel #1 level (plus values for normal phase, minus values
for reverse phase)
Channel #1 pan
Channel #1 delay time
Channel #1 feedback gain (plus values for normal-phase
feedback, minus values for reverse-phase feedback)
Channel #2 pitch shift
Channel #2 pitch shift fine
Channel #2 level (plus values for normal phase, minus values
for reverse phase)
Channel #2 pan
Channel #2 delay time
Channel #2 feedback gain (plus values for normal-phase
feedback, minus values for reverse-phase feedback)
Pitch shift precision
Tempo parameter sync on/off
Used in conjunction with TEMPO to determine Channel #1
delay
Used in conjunction with TEMPO to determine Channel #2
delay
Range
Rotation stop, start
Rotation speed (see SLOW and FAST parameters)
SLOW rotation speed
FAST rotation speed
Overdrive level
Acceleration at speed changes
Low-frequency filter
High-frequency filter
Effects Parameters
Description
(Maximum value depends on the tempo
Description
01V96—Owner's Manual
261