Yamaha MIXING CONSOLE Owner's Manual page 172

172
Chapter 16—Libraries
2 Rotate the Parameter wheel or press the [INC]/[DEC] buttons to select the
desired memory.
The selected memory appears inside the dotted box.
3 Move the cursor to one of the following function buttons, then press
[ENTER].
A
TITLE EDIT
This button displays the Title Edit window, which enables you to edit the title of the
selected memory. Move the cursor to the OK button, then press [ENTER] to confirm
the edited title. Refer to page 30 for more information on entering characters.
B
RECALL
This button recalls the contents of the selected library memory. If you turn on the Recall
Confirmation parameter on the DIO/Setup | Prefer1 page, the 01V96 displays a memory
recall confirmation window.
C
STORE
This button stores the settings to the selected memory. Before you store the settings, you
can enter or edit the title using the Title Edit window. Refer to page 30 for more infor-
mation on entering characters.
You can disable the Title Edit window by turning off the Store Confirmation parameter
on the DIO/Setup | Prefer1 page. If you bypass the Edit Title window, the name "New
Data" will be used as a title for the Scene memory.
D
CLEAR
This button deletes the contents of the selected memory. After you press [ENTER], the
01V96 displays a confirmation window. To execute the delete operation, move the cur-
sor to the YES button in the confirmation window, then press [ENTER].
Note: If you select a memory that already contains settings and execute the delete operation,
the settings will be lost. Make sure that you do not accidentally delete important settings.
01V96—Owner's Manual