Yamaha MIXING CONSOLE Owner's Manual page 137

2 Move the cursor to the Surround mode button you want to use.
When you move the cursor to one of these buttons, speaker icons appear, indicating a typ-
ical listening position and the Surround Channel to Bus Out configuration.
• 3-1 Surround
• 5.1 Surround
• 6.1 Surround
3 Press the [ENTER] button.
The confirmation window for changing the Surround mode appears.
4 Move the cursor to the YES button, then press [ENTER].
The 01V96 enters the selected Surround mode.
5 To link the Input Channel Pan setting with the stereo surround panning,
move the cursor to the PAN/SURR LINK button, then press [ENTER].
When the PAN/SURR LINK button is turned on, adjusting the Input Channel pan settings
will also change the stereo surround panning accordingly, and vice versa.
Setting Up and Selecting Surround Pan Modes
137
12
01V96—Owner's Manual