Attenuating Input Channels - Yamaha MIXING CONSOLE Owner's Manual

Digital mixing console
Table of Contents

Advertisement

E
Meters
These meters indicate the levels of the post-compressor signals and the amount of gain
reduction.
F
ON/OFF
The ON/OFF button turns the currently-selected Input Channel's compressor on or off.
G
PARAMETER section
These controls enable you to set the compressor parameters. (See page 278 for more
information on the parameters of each compressor type.)
Tip:
• This function is unavailable for the ST IN Channels.
• You can store the compressor settings in the compressor library, which features preset pro-
grams that can be used for various applications (see page 181).

Attenuating Input Channels

To set the attenuator for each Input Channel, press the DISPLAY ACCESS [EQ] button,
then press the [F3] button to display the EQ | In Att page.
Move the cursor to the knob for the desired Input Channel, then rotate the Parameter wheel
to set the amount of attenuation in the range of –96 dB to +12 dB.
Tip: You can also set the attenuation amount (in dB) for the currently-selected channel on
the EQ | EQ Edit page.
Setting the Input Channels from the Display
83
01V96—Owner's Manual
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

01v96

Table of Contents