Table of Contents
Advertisement
182
Chapter 16—Libraries
No.
31
32
33
34
35
36
EQ Library
This library enables you to store and recall EQ settings for Input Channels, Bus Outs 1–8,
Aux Outs 1–8, and Stereo Out. The library contains 40 preset memories and 160 user (read-
able & writable) memories.
Follow the steps below to use the EQ library.
1 Press the DISPLAY ACCESS [EQ] button, then press the [F2] button.
The EQ | EQ Library page appears.
A
CURRENT TYPE
This parameter displays the currently-selected channel EQ type (TYPE I or II).
B
CURRENT CURVE
This graph displays the current EQ curve.
C
Level meters
These meters indicate the post-EQ levels of the currently-selected channel and its avail-
able pair partner.
D
Type & Curve section
The type and curve of the currently-selected EQ program are displayed here.
2 Use the LAYER buttons to select layers, then press the [SEL] buttons to select
channels.
You can now store the selected channel EQ settings or recall the EQ library memories to
channels. For details on storing and recalling memories, see "General Library Operation"
on page 171.
01V96—Owner's Manual
Preset Name
Type
Click Erase
EXPAND
Announcer
COMPAND-H
Limiter1
COMPAND-S
Limiter2
COMP
Total Comp1
COMP
Total Comp2
COMP
1
2
Description
Expander for removing a click track that may bleed
through from a musician's headphones.
Hard-kneed compander for reducing the level of the
music when an announcer speaks.
A soft-kneed compander with a slow release.
A "peak-stop" compressor.
Compressor for reducing the overall volume level. Use
it on the stereo output during mixdown, or with paired
Input or Output Channels.
A variation on preset 35, but with more compression.
3
4
Advertisement
Table of Contents
