Selecting Fader Modes - Yamaha 006IPTO-F0 Owner's Manual

Selecting Fader Modes

The function of channel faders (1–16) depends on the selected Layer and Fader mode.
1 Select a layer that includes the desired channel (see page 33).
2 Press the FADER MODE [FADER/AUX] button to select a Fader
mode.
• When the [FADER]indicator
lights up: .............................................. You can use channel faders to
• When the [AUX] indicator
lights up: .............................................. You can use channel faders to control Input
The following table shows the channel fader functions for each Layer and Fader mode.
LAYER buttons
[1-16] button
[17-32] button
[33-48] button
[REMOTE 1] button
[REMOTE 2] button
[MASTER] button
Note: You cannot select Aux mode while the Master layer is selected. If you switch to the Master
layer while the FADER MODE [AUX] indicator is lit, the indicator automatically turns off
and the [FADER] indicator lights up.
control Input Channel levels or
Output Channel (Aux Out 1–8,
Bus Out 1–8) master levels.
Channel Aux Send levels.
Fader Mode
Fader Input Channels 1–16 level
Aux Input Channels 1–16 Aux Send level
Fader Input Channels 17–32 level
Aux Input Channels 17–32 Aux Send level
Fader Input Channels 33–48 level
Aux Input Channels 33–48 Aux Send level
Operation depends on the selected target (see
Fader
page 215).
Aux No operation
Operation depends on the selected target (see
Fader
page 215).
Aux No operation
Aux Send master 1–8
Fader
output level
Aux No operation
Selecting Fader Modes
FADER MODE
Channel Strip Fader
1–8 9–16
No operation
No operation
Bus Out master1–8 out-
put level
No operation
DM1000 Version 2—Owner's Manual
35
3
FADER
AUX