Aux Outs; Aux Out 1-8 - Yamaha MIXING CONSOLE Owner's Manual

Digital mixing console
Table of Contents

Advertisement

9 Aux Outs

This chapter describes how to control Aux Out 1–8.
Aux Out 1–8
The Aux Out 1–8 section mixes signals routed from the Input Channels to the correspond-
ing Aux Sends, processes them using on-board EQ, compressor, etc., then routes them to
the specified internal effects processors, output connectors or I/O card connectors.
The 01V96 features eight Aux Sends, which can be used to send signals to the internal and
external effects processors and monitors.
The following diagram illustrates the Aux Out 1–8 signal flow.
• INSERT
• ATT (Attenuator)
• 4 BAND EQ (4-band equalizer)
• COMP (Compressor)
• ON (On/Off)
• LEVEL
• OUTPUT DELAY (Output delay)
• METER
These parameters are the same as the Stereo Out and Bus Out 1–8 (see page 97).
Tip: You can also pair adjacent odd-even Aux Sends (in this order) for stereo Aux operation.
Note: With the default setting, Aux Out 1–4 are patched to OMNI OUT connectors 1–4 and
to internal Effects processors 1–4. However, you can change this patching on the Patch | Output
page.
(Gain Reduction)
(Out Meter)
METER
METER
COMP
INSERT
INSERT
METER
ON
LEVEL
4BAND
ATT
EQ
Aux Outs
METER
INSERT
AUX 1(...8)
OUTPUT
DELAY
01V96—Owner's Manual
109
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

01v96

Table of Contents