Yamaha MIXING CONSOLE Owner's Manual page 227

This page contains the following parameters. (These parameters are explained in the order
from the top of the left column to the bottom of the right column.)
• Auto PAN Display
If this check box is on, the Pan/Route pages appear automatically when you operate the
[PAN] control in the SELECTED CHANNEL section. In Stereo Surround mode, operating
the [PAN] control enables you to adjust the left and right Pan setting. Otherwise, it enables
you to adjust the Surround Pan settings.
• Auto EQUALIZER Display
If this check box is on, the EQ | EQ Edit page appears automatically when you press an
EQ-related button in the SELECTED CHANNEL section.
• Auto SOLO Display
If this check box is on, the DIO/Setup | Monitor page appears automatically when you solo
an Input Channel.
• Auto WORD CLOCK Display
If this check box is on, the DIO/Setup | Word Clock page appears automatically if the cur-
rently-selected external wordclock source fails.
• Auto Channel Select
If this check box is on, you can select a channel by moving the corresponding fader, or by
turning on the corresponding channel [SOLO] or [ON] button.
• Store Confirmation
If this check box is on, the Title Edit window to input a Scene or library memory name
appears when you store a Scene or library memory.
• Recall Confirmation
If this check box is on, a confirmation window appears when you recall a Scene or library
memory.
• Patch Confirmation
If this check box is on, a confirmation message appears when you edit the Input and Output
Patches.
• Pair Confirmation
If this check box is on, a confirmation message appears when you create or cancel a pair.
• L/R Nominal Pan
If this check box is on, left/odd and right/even signals will be at nominal level (0 dB) when
Input Channels and ST IN Channels are panned hard left or hard right. If this check box is
off, the signal level rises by +3 dB.
• Fast Meter Fall Time
If this check box is on, the level meters fall more quickly.
• DIO Warning
If this check box is on, a warning message appears when any errors are detected in digital
audio signals received at the Slot or 2TR Digital Inputs.
• MIDI Warning
If this check box is on, a warning message appears when any errors are detected in the
incoming MIDI messages.
227
Setting Preferences
01V96—Owner's Manual
19