Introduction; System Overview; Number Of Additional Devices - Pyronix Enforcer 32-WE Programming And Installation Manual

1 . I n t r o d u c t i o n
The Enforcer 32-WE is a wireless alarm system that has been designed to enable easy installation and
minimal maintenance. The Enforcer 32-WE protects the property (domestic or commercial) with a
multitude of unique features:
• Two Way Wireless Protection
• Signal Strength Indicator (SSI)
• Instant Two Way Device Control
• Pyronix High Security Wireless Protocol Encryption
• Programmable Wireless Supervision Time
• Intelligent Wireless Jamming Detection

1.1 System Overview

Areas:
Wireless Inputs (max):
Wired Inputs (max):
Total Inputs:
Outputs (max):
User / Manager Codes:
Duress / Guard Codes:
Communications:
Arm Devices (max):
Logs:
Remote Arm and Soak Test:
Event Signalling to UDL:
Memory Type:
Compliant to EN Grade
Environmental Class:

1.2 Number of Additional Devices

Input Expanders (Wired):
Wireless Keyfobs:
Code Combinations:
Wireless Keyfob Variants
Wireless Bells:
Output Expanders:
Additional Keypads:
External Readers:
Internal Readers:
NOTE : All wireless learning is performed in the 'WIRELESS DEVICE CONTROL' menu, see page: 10 for
more details.
*Compliance labelling should be removed or adjusted if non-compliant configurations are used.
*Please note that technical functions for example fire, gas and flooding are not security graded as they
are outside the scope of EN50131-1 and EN50131-3.
Enforcer Programming Manual
4 (1 single partition – 4 Levels Sets)
32
34 (2 x inputs on I/O board (Inputs 33-34) and 4 x ZEMs
(Inputs 35-66)
66
38 (1 x output module and 3 x outputs on I/O board, 4 on each ZEM
if EURO-ZEM8+ or EURO-ZEM8+PSU are used, 1 on each RKP)
80 (Max 32 x wireless keyfobs)
10
PSTN (Digi-1200) or GSM (Digi-GSM) modem
4 (Including main keypad).
750


EEPROM
* : 2
II
4
32
4294967295 (fully encrypted rolling code)
1
2
1
3
Page: 4