Introduction; Two Way Wireless High Security; Battery Monitoring/Saving - Pyronix Enforcer 32-WE Programming Reference Manual

2. Introduction

2.1 Two Way Wireless High Security

The Enforcer 32-WE is a wireless alarm system that has been designed with a customer's security in
mind; with quick and easy installation and minimal maintenance, the Enforcer 32-WE protects a
property with a multitude of unique features.
Taking full advantage of Pyronix's innovative two way wireless technology, the wireless devices on the
Enforcer 32-WE are constantly communicating with each other, using the Pyronix High Security
Wireless Encryption Protocol.
The Enforcer 32-WE two way wireless devices are fully operational when the system is armed, making
the system more secure, compared to other wireless systems, where devices are disabled for up to
five minutes after every activation to save battery, therefore compromising the security.
The Enforcer 32-WE has been engineered by Pyronix as a secure, reliable and easy to use wireless
alarm system. It includes the following features below:

2.2 Battery Monitoring/Saving

The Enforcer 32-WE uses advanced technology to preserve the battery life of each wireless device.
However, the Enforcer 32-WE indicates when a battery needs replacing a month in advance before
the device stops working. This key feature gives enough time to change the battery in the specific
device. Other wireless alarm systems may not give a low battery warning signal, meaning that
devices could stop working, leaving the environment unprotected.
2.2.1 High Security Encryption
128 bit high security wireless encryption protocol, and intelligent wireless jamming detection.
2.2.2 User Friendly Keyfobs
The fully two way wireless keyfob indicates the status of the control unit via 3 colour LEDs:
System armed: When the system is armed a RED LED will illuminate momentarily
System disarmed: When the system is disarmed a GREEN LED will illuminate momentarily
System fault: When the system is in fault condition an AMBER LED will illuminate momentarily,
This will also flash when the keyfob is unable to arm the system.
It is possible to allocate different functions to each keyfob such as arming / disarming different
areas, activating outputs to control external devices such as gates, requesting system status, and
activating panic alarms. Up to 32 wireless keyfobs can be added to the Enforcer 32-WE. Each
wireless keyfob has its own user ID which can be reported to the ARC and user mobile phone which
are stored into the event log of the control panel individually.
The keyfob also allows the arming/disarming of every area individually, giving total control of the
Enforcer 32-WE.
2.2.3 User Automation Outputs
The Enforcer 32-WE includes user automation outputs that gives the option to operate up to 20
devices such as gates, lights, sprinklers, etc. via the keypad or remotely via a Keyfob, thus
extending the use of the Enforcer-32-WE.
2.2.4 SMS Text Notifications and Remote Control
The system will notify via SMS text messages in real time. For example; notification that someone
has returned home safely or notification of a leakage of water in a property etc.
Page: 3