General Information; Default Codes; Initial Power Up; Testing The Keypad - Pyronix Enforcer 32-WE Programming And Installation Manual

3 . G e n e r a l I n f o r m a t i o n

3.1 Default Codes

User: 1234.

3.2 Initial Power Up

Power up the Enforcer 32-WE system, an alarm will be generated. Proceed to the nearest keypad,
which will display (from power up):
1. Once power has been applied to the Enforcer 32-WE
(see page: 37). 'Please Wait' and then '485 Comms
Lost' will be displayed. After approximately one
minute, the Enforcer 32-WE will display the name and
the time on the display.
2. The Enforcer 32-WE is defaulted to keypad address
'0'.
NOTE: The wording 'Enforcer 32-WE' can be changed in the function 'SYSTEM DISPLAYS' –see page:16.

3.3 Testing The Keypad

With the system unset, press the key for 10 seconds at any keypad. This will cause all the LEDs
on that keypad to illuminate, and the LCD screen to scroll a display testing each pixel. The keypad
will revert to normal display approximately 10 seconds after the key is released.

3.4 Keypads / Readers

3.4.1 The Enforcer Keypad and additional keypads (EUR-068)
3 additional wired keypads may also be connected to the Enforcer 32-WE. Refer to page: 39 for
installation details.
KEY FUNCTIONS:
a = Exit manager menu / Selects Area A.
b = Moves backwards to the previous menu item / Selects Area B.
c = Enables chime and displays additional information in the log / Scrolls back 'one' in a sub
menu / Selects Area C.
D = Moves forward in the log / scrolls between options and enters the master manager menu
/Selects Area D.
f p = Not used.
[ ] = Directional buttons.
I = Selects items and enters menus.
A = Cancels items, resets the panel and moves to next item in a menu item.
NOTE: If any additional keypads are installed on the Enforcer 32-WE, it is possible to access the
Engineer Menu on any keypad. For example, if the Engineer menu is accessed on keypad address
0, the other keypads will display 'system busy', to access the Engineer menu on any other
keypad, press the  key on the relevant keypad and the Engineer menu will be displayed.
Enforcer Programming Manual
Master Manager: 2222
Enforcer
Time 13:43 c
Page: 6
Engineers: 1111
Please Wait...
Enforcer
Time 13:43 c
Enforcer
Time 13:43 c
Tag