Table of Contents
Advertisement
2. Introduction
2.1 Hybrid Integrated System with Automation Control
The PCX 46 is hybrid alarm system. It integrates the award winning Enforcer Two Way wireless
technology with 30 automation outputs and a host of high security features. The PCX 46 is easy to use
and designed to communicate to you about any system activations via SMS messages. It also can send
alarms to the Alarm Receiving Centre and maintenance company.
2.2 2-Way Wireless Technology
Using the wireless input expansion module RIX 32-WE, the PCX 46 converts into a high security wireless
system taking full advantage of Pyronix' innovative wireless technology using the Pyronix High Security
Wireless Encryption Protocol. This module also allows the access to all Enforcer system 2-way wireless
peripherals.
No inhibitions: The two way wireless movement detectors are fully operational when the system is
armed, making your system more secure, compared to other wireless systems, where devices are
disabled for up to five minutes after every activation to save battery, therefore compromising your
security.
Battery Monitoring/Saving: The Enforcer wireless system uses advanced technology to preserve the
battery life of each wireless device. However, the system informs you when a battery needs replacing a
month in advance before the device stops working. This key feature gives you enough time to change
the battery in the specific device. Other wireless alarm systems may not give you a low battery warning
signal, meaning that devices could stop working, leaving your environment unprotected.
High Security Encryption: The wireless protocol is encrypted with 128 bit making it impossible to
replicate or copy its wireless peripherals. It also uses an intelligent wireless jamming detection
technology.
User Friendly Keyfobs: Up to 32 wireless keyfobs can be added to the PCX 46 system. Each wireless
keyfob has its own user ID which can be reported to the ARC and user mobile phone. It is possible to
allocate different functions to each keyfob such as arming / disarming different areas, activating the
automation outputs to control external devices such as gates, requesting system status, and activating
panic alarms giving you total control of your system. It shows you the system status using a 3 colour
LED:
System armed: When the system is armed a RED LED will illuminate momentarily.
System disarmed: When the system is disarmed a GREEN LED will illuminate momentarily.
System fault: When the system is in fault condition an AMBER LED will illuminate.
2.3 User Automation Outputs
The PCX 46 has ability to operate up to 30 user automation outputs that give you the option activate
gates, lights, sprinklers, etc. via your keypad, wireless keyfob or smart phone app.
2.4 SMS Text Alarm Notifications
When your system is activated it will notify you via SMS text messages in real time. For example,
notification that your child has returned home from school safely or notification of a leakage of water in
your property etc.
2.5 Total System Remote Control with a SMS Remote Phone Application
The PCX system can be remotely controlled by using a smart phone app. It allows you to arm, disarm
PCX 46, check the system status and bypass inputs. It also allows you to activate remotely up to 30
devices such as gates, lights, sprinkles and others. The remote control app is available in several
languages.
PCX 46 Programming Reference
Page: 3
Hide quick links:
Advertisement
Table of Contents
