A-4-2 Error Descriptions - Omron 1 S Series User Manual

Appendices
A-4-2 Error Descriptions
This section describes errors.
Error Table
The items that are used to describe individual errors (events) are described in the following copy of an
error table.
Event name Gives the name of the error (event).
Description Gives a short description of the error (event).
Gives the source of the error
Source (event).
Error
Level
attributes
Effects User program
EtherCAT NET RUN
Indicators Gives the status of the built-in EtherNet/IP port and built-in EtherCAT port indicators. Indicator status is
given only for errors in the EtherCAT Master Function Module and the EtherNet/IP Function Module.
Variable
System
-defined
Lists the variable names, data types, and meanings for system-defined variables that provide direct error
variables
notification, that are directly affected by the error, or that contain settings that cause the error.
Assumed cause
Cause and
correction
Lists the possible causes, corrections, and preventive measures for the error (event).
Attached Provides the additional information that is displayed by the Sysmac Studio or an NS-series PT.
information
Precautions/ Provides precautions, restrictions, and supplemental information.
Remarks
*1. One of the following:
Minor fault: Minor fault level
Observation
Information
*2. One of the following:
Automatic recovery: Normal status is restored automatically when the cause of the error is removed.
Error reset: Normal status is restored when the error is reset after necessary measures are taken.
Cycle the power supply: Normal status is restored when the power supply is turned OFF and then back ON after neces-
sary measures are taken.
Replace the Servo Drive: Normal status is restored when the Servo Drive is replaced with a new one.
*3. "Continues." indicates that execution of the user program will continue.
A - 132
Source details
Tells the influ-
ence on con-
Recovery
*1
trol.
Tells what will
happen to exe-
Operation
cution of the
*3
user program.
EtherCAT NET ERR
Data type
Correction
1S-series with Built-in EtherCAT Communications and Safety Functionality User's Manual (I621)
Event code Gives the code of the error (event).
Gives details on
Detection
the source of
timing
the error.
Gives the recov-
*2
Log category
ery method.
Provides special information on the operation that
results from the error (event).
EtherCAT LINK/ACT
Name
Prevention
Tells when the
error is
detected.
Tells which log
the error is
saved in.