Setting Up Password Protection - Sartorius Combics Series Operating Instructions Manual

Operating Design
k k
k k
38 Operating Instructions Combics Indicators
(
Use the ( key to exit the menu level to make additional settings if required
or
)
Press the ) key longer than 2 seconds to exit the menu.

Setting up Password Protection

e
t Turn on the device.
t While all segments are lit, briefly press the ) key.
y The first item in the main menu is shown: APPLIC..
... t Press the k key until the SETUP menu item is displayed.
)
t Press the ) key to open the Setup sub-menu.
y The first parameter in the Setup sub-menu is displayed: WP-1.
... t Press the k key until U-CODE is displayed.
)
t Press the ) key to open the menu item.
y The position for the first character to be entered flashes.
p k
t U se the p and k keys to select the desired character.
The p starts the character selection with A alphabetical and the
k key starts the character selection with 0 and counts upward.