Sartorius Combics Series Operating Instructions Manual page 33

Operating Design
Combics 1
Keys for all models
Keys for Combics 2 only
32 Operating Instructions Combics Indicators
Weighing Operation
e
On/Off key
When in Standby mode, STANDBY is displayed.
(
Zero key
- Press the key less than 2 seconds:
- Press the key longer than 2 seconds: D isplays the adjustment/configuration
)
Tare key
- Saves the numeric input as the tare weight
- Press the key longer than 2 seconds:
k
Function key: Depends on the configuration in the Setup menu, switches between the
- First and second weighing unit
- Gross and net values (Combics 1 only)
- Normal and 10-fold higher display resolution (Combics 1 only)
- Results display and SQmin display
J
ISO test: Start calibration or adjustment
p
Print key
- Press the key less than 2 seconds:
- Press the key longer than 2 seconds:
n
Toggle key: When two platforms are connected, this key toggles the display
between the two readouts.
The following four keys are used for operating the individual applications. Their
exact function is described in the respective section for the application.
c
Delete key: Deletes initialization values or totalizing memory. During numeric entry
the last character entered is deleted.
r
Reference value key: Changes the set reference value.
O
OK key: Applies values or starts an application program.
w
Toggle key: Toggles between display modes within an application program.
Combics 2
Zero
counter
Start calibration/adjustment
Print
Print GMP footer