Sartorius Combics Series Operating Instructions Manual page 87

Operation
Available parameter settings * = Factory setting
86 Operating Instructions Combics Indicators
– V alue saved automatically when the weighing platform is stable and the
defi ned minimum load is exceeded.
If the defi ned minimum load is not exceeded, you can save the item
manually
by pressing the O key. Regardless of these settings, the current value cannot
be saved automatically unless the platform is unloaded before the next sample is
placed on it. The weighing platform is considered to be unloaded when the load
is less than 50% of the minimum load.
The number of items added to memory is shown in the number display.
P ress the c key to clear the totalizing memory. A printout is automatically
generated.
W ith two weighing platforms connected, you can add values from both platforms
to the totalizing memory. The displayed result is accurately calculated in the active
weight unit.
Example: When you add 1.243 g (determined on a weighing platform with three
decimal places) to 1.4 g (determined on a platform with 1 decimal place), the display
shows 2.643 kg.
Preparation t Open the APPLIC. / APPLIC.3 / TOTALIZ menu.
MIN.INIT Minimum load for initialization
AUTO.SAV Autosave
PRT.SAV. Individual/Component printout when saved
VAL.FROM Source of data for autosave
SAV.VAL. Save value
Printout You can confi gure whether a printout is generated automatically when a weight
value is stored in the totalizing memory or manually by pressing the p key.
Setting: Applic./Applic.3/TOTALIZ menu item 3.17.
-
Y ou can print manually by pressing the p key (single printout): 3.17.1
-
C omponent log (single printout of an item): 3.17. 2
T he total data record is printed when you clear the totalizing memory (by pressing
the c key).
1 digit
1 digit
2 digits
2 digit
5 digits
5 digit
10 digits
10 digT.
20 digits
20 digT.
50 digits
50 digT.
100 digits
100 diG.
200 digits
200 diG.
500 digits
500 diG.
1000 digits
1000 dI.
Off
OFF
On
ON
Automatic printing off
OFF
P rint the entire standard print confi guration
ON
every time with the O key is pressed 3.17.2*
Application 1
APPLIC.1
Application 2
APPLIC.2
Net
NET
Calculation
CALCUL.
Net and Calculated
NET+CAL
3.6
3.6.1*
3.6.2
3.6.3
3.6.4
3.6.5
3.6.6
3.6.7
3.6.8
3.6.9
3.6.10
3.16.
3.16.1*
3.16.2
3.17.
3.17.1
3.22.
3.22.1*
3.22.2
3.23.
3.23.1*
3.23.2
3.23.3