Sartorius Combics Series Operating Instructions Manual page 64

Number of measurements for average You can enter the desired number of weight measurements to determine the average
Application start There are three ways to start the averaging routine:
With this application, you can calculate averages from several weighing operations.
It is used when either the object to be weighed (e.g. animals) or the environment
during weighing are unstable. Selection and settings in the Applic. / Applic.1 /
ANIM.WG menu.
Features – A veraging started manually or automatically (.../start menu item 3.18).
With manual start selected, the averaging routine begins when you press a key
(provided the start conditions are met).
With automatic start selected, the application begins when you place the first
load on the platform (provided the start conditions are met).
– E nter the number of sub-weighing operations using the keypad
– U se the r key to select the number of measurements for averaging
– Activate Info mode via the I key
– T oggle the display from "result of last measurement" to "current weight" by
pressing the w key
– A utomatic results printout (... /PRINT menu item 3.20).
– A utomatic taring of container weight (APPLIC./aut.tare menu item 3.7).
– A utomatic start of averaging when the scale is turned on and a sample placed
on the platform (provided start conditions are met, APPLIC./aut.Strt menu
item 3.8).
Exit application, delete parameters
T he value of the reference sample weight in the reference memory remains active
until it is deleted via the c key or overwritten or until the application is changed.
The reference sample weight also remains saved after the scale is turned off.
Y ou can assign different functions to the c key for deleting applications. When
you clear applications, you can delete either the data stored for all applications or
just selected data stored for the active application.
Setting: Applic./CLER.CF menu item 3.24
Tare function:
If you store a tare (weight value) by pressing the ) key, you can later enter a tare
value manually. The tare value you enter is added to the stored tare value.
Setting: Applic. / TARE.FNC menu item 3.25.1 (factory setting)
A tare value entered manually overwrites a stored tare value (weight value). If you
enter a tare value manually, a tare value (weight value) stored later overwrites the
manually entered value.
Setting: Applic. / TARE.FNC menu item 3.25.2
Restore factory default settings: Applic./Reset menu item 9.1.
using the keypad. This value remains active until it is overwritten by another value. It
also remains in memory when you switch to a different application program, or turn
off the scale.
– M anual start with preset number of sub-weighing operations: Place the sample
on the platform and press the O key
– M anual start with user-defined number of sub-weighing operations: Place the
sample on the platform and enter the number of weighing operations using the
keypad. Press the r key to save the number entered and begin weighing.
– A utomatic start with preset number of sub-weighing operations: Measurement
begins when you place the first sample on the platform, provided the start
conditions are met.
Preparation t Open the APPLIC. / APPLIC.1 /ANIM.WG menu.
Operating Instructions Combics Indicators
Operation
63