Sartorius Combics Series Operating Instructions Manual page 102

Example: Using the Counting application with a stored average piece weight.
Confi guration: Application: Counting (COUNT.)
Saving the average piece weight
Start the application.
t D etermine the average piece weight using one of the methods described above.
t E nter the memory cell number using the keypad, and press and hold the R key
(min 2 seconds).
Loading the average piece weight or reference sample quantity
t E nter the memory cell number and press the I key.
– U se the k key to switch between wRef (average piece weight) and nRef
(quantity).
– Use the ) key to scroll the displayed value to the right.
– U se the R key to activate the displayed memory.
– Press and hold the c key (min. 2 seconds) to delete the displayed memory.
t Exit the mode using the c key.
Overwriting data in a memory cell
t E nter the memory cell number to be overwritten via the keypad.
t P ress and hold the R key (min 2 seconds).
y T he previous average piece weight is overwritten.
t T o cancel without saving, press the c key.
Deleting an average piece weight
t E nter the memory cell number of the average piece weight to be overwritten.
t P ress the I key.
t D elete the displayed value by pressing and holding the c key (min. 2 seconds) .
Operating Instructions Combics Indicators
Operation
101