Sartorius Combics Series Operating Instructions Manual page 69

Operation
Available parameter settings * = Factory setting
( (
Minimum load for initialization You can set the minimum load here, i.e. the load that must be placed on the
68 Operating Instructions Combics Indicators
Entering the reference percentage value
The reference weight for 100% is entered using the keypad and the O key is
pressed to initialize the application.
Reading the reference percentage value
The reference weight can be read using a barcode scanner.
The entered value remains active until deleted by pressing the c key or until
h
overwritten by a new value. It remains saved after the scale is switched off.
Preparation t Open the APPLIC. / APPLIC.1 / PERCENT menu
MIN.INIT Minimum load for initialization
RESOLUT Resolution for calculation of reference value
DEC.PLCS Decimal places in displayed result
SAVE WT. Parameter for saving weight values
REF.WP Reference weighing instrument
CALC.DIS Display of calculated value
)
t T o save the setting, press the ) key.
... t T o exit setup: Press the ( key several times.
weighing platform in order to carry out the application. If the load on the platform
is too light, the following will occur:
– Error code Inf 29 appears,
– The weighing platform is not initialized,
– The preset reference sample quantity is saved.
1 digit*
1 digit
2 digits
2 digit
5 digits
5 digit
10 digits
10 digT.
20 digits
20 digT.
50 digits
50 digT.
100 digits
100 diG.
200 digits
200 diG.
500 digits
500 diG.
1000 digits
1000 dI.
Display accuracy
DISP.ACC
Display accuracy + 1 decimal place
10 FOLD
Display accuracy + 2 decimal places
100FOLD
None
NONE
1 decimal place
1 DEC.PL
2 decimal places
2 DEC.PL
3 decimal places
3 DEC.PL
With stability
STABIL.
With increased stability
ACC.STAB
No weighing platform selected
NO WP
Weighing platform WP1
wp 1
Weighing platform WP2
wp 2
Residual quantity
RESID.QT
Loss
LOSS
3.6
3.6.1
3.6.2
3.6.3
3.6.4
3.6.5
3.6.6
3.6.7
3.6.8
3.6.9
3.6.10
3.9.
3.9.1*
3.9.2
3.9.3
3.10
3.10.1*
3.10.2
3.10.3
3.10.4
3.11
3.11.1*
3.11.2
3.13.
3.13.1*
3.13.2
3.13.3
3.15.
3.15.1*
3.15.2