Sartorius Combics Series Operating Instructions Manual page 98

Additional Functions Printing the "Selection" and "List" Settings
Printout (example) Indiv. Prt
DAT/TIM
AUT.ONCE
FLEX.PRN
DEC.SEP.
ALIB.MEM
Restore factory default settings
RESET
Setting factory settings
– T he rows of the protocol list can be called up and activated individually.
Example: see under Confi guration, menu item 7.6
– T he print selection set as active appears with the left selection bar on the
display, e.g. gross, tare, net.
t E xpand the printout: Press the ) key. The selection bar appears on the right
of the display.
t S elect print items: Press the k key
t S ave the desired print items: Press the ) key
t P ress the ( key: to switch to the active print selection. The selection bar
appears on the left. The required print item is set as active and appears in the
printout.
– P rint items can be deleted individually from the active printout selection:
Press and hold the ( key.
t S ave settings with the ) key and exit Setup: Press the ( key several times.
LIST: Output of the current printout list
SELECT: Print currently selectable items
t W hen the selection bar is in LIST or SELECT: Press the p key.
List
====================
Net (N)
Gross (G#)
Tare
Tare (T2/PT2)
Piece count
====================
etc.
Date without time
Automatic printout after stability
Flex print
Decimal separator
Alibi memory
Operating Instructions Combics Indicators
Operation
7.14
7.15
7.16
7.17
7.18
9
9.1
97