Sartorius Combics Series Operating Instructions Manual page 80

Setp + 1.250 kg
Min + 1.240 kg
Max + 1.280 kg
G# + 1.256 kg
T + 0.000 kg
N + 1.256 kg
Lim + 0.48 %
W.Diff+ 0.006 kg
-------------------
O
t Save the upper limit value.
t Remove the sample with the target weight from the weighing platform.
t The samples can now be checked one after the other.
y T he LEDs next to the display indicate the results:
yellow LED: sample too heavy
green LED: sample in tolerance range
red LED: sample too light
p
t Print the results.
Note: If automatic printout of results is enabled, you do not need to press the p
key. The results are printed automatically.
Printout configuration: see page 96
Target
Minimum
Maximum
Gross weight
Tare weight
Net weight
Percentage of deviation from target*
Absolute deviation from target
* When displayed in relation to target value:
If the weight is lighter than the lower limit, the display shows: LL
If the weight is heavier than the upper limit, the display shows: HH
Operating Instructions Combics Indicators
Operation
79