Sartorius Combics Series Operating Instructions Manual page 34

1 2 3
, , ...
I
Info key: Used to display application parameters and manual tare values (Info after
pressing a follow-up key, e. g. ))
. 0
Number keys: Used to enter numeric values
,
t T o apply the value, press the corresponding function key (e.g. key ) to save
the entry as a manual tare value.
t T o delete the last character entered, press the c key.
D
Application toggle key: Toggles between available applications
d
ID key: Used to enter operator IDs
R
Save key: Used to save values to the product data memory or load to the application
K
Resolution toggle key: Toggles to 10-fold increased resolution
L
Gross/Net value key: Toggles between the gross or net value
Saving Settings in Weighing Mode
All application parameters saved (e.g., reference values) remain in memory and are
available when
– the device has been switched off and then on again
– y ou return to the originally selected application from a second one (e.g., when
you switch from Averaging back to Counting all parameters saved for Counting
are available).
Applying the Tare Weight
t Place the tare object on the weighing p latform.
t Press the T key.
y The value is applied as the tare value.
Input Through the Digital Control Port
You can connect an external hard drive or foot switch to the control port (universal
interface). You can assign the following functions to the control port in the SETUP /
CTRL IO / INPUT / PARAMET / EXT.KEYB menu:
– p key
– p key (hold)
– ) key
– J key
– k key
– n key
– O key
– ( key
– e key
– c key
– I key
– D key
– K key
– L key
Operating Design
Operating Instructions Combics Indicators 33