Configuring Weighing Platforms
e
k k
k k
18
Operating Instructions Combics Indicators
Activating the Service Mode
)
...
t Switch to the Menu mode (see page 35).
... t Access the Setup menu.
)
t Select Setup
If a password is requested at this point, enter the service password (see
Appendix) and continue with "Saving the service password."
... t A ccess the U-Code menu item
)
t Select U-Code
t Enter the service password (see Appendix).
)
t Apply the service password
y The Service mode is active: an "S" appears in the top right-hand corner of the
display.
( (
t Return to Setup in the Service mode.