Configure Tcp/Ip For Mvs For The Printer - Xerox DocuPrint 180 IPS Installation Planning Manual

5. Configure TCP/IP for MVS for the printer

XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE
Table E-6.PSF/MVS PRINTDEV statement example
//PRT277 CNTL
//PRT277 PRINTDEV
// OVLYDD=*.OLAY01, /* OVERLAY LIBRARY DD */
// IPADDR='13.240.160.97',
// PORTNO=5005
// PSEGDD=*.PSEG01, /* SEGMENT LIBRARY DD */
// PDEFDD=*.PDEF01, /* PAGEDEF LIBRARY DD */
// FDEFDD=*.FDEF01, /* FORMDEF LIBRARY DD */
// JOBHDR=*.JOBHDR, /* JOB HEADER SEPARATOR OUTPUT */
// JOBTRLR=*.JOBTLR, /* JOB TRAILER SEPARATOR OUTPUT */
// DSHDR=*.DSHDR, /* DATA SET HEADER SEPARATOR */
// MESSAGE=*.MSGDS, /* MESSAGE DATA SET OUTPUT */
// BUFNO=29, /* NUMBER OF WRITE DATA BUFFERS */
// PAGEDEF=X06483, /* DEVICE PAGEDEF DEFAULT */
// FORMDEF=A10111, /* DEVICE FORMDEF DEFAULT @H3C*/
// CHARS=(GT15, /* DEVICE */
// GT12,GT18,GT24), /* DEFAULT FONT SET @H3C*/
// PIMSG= (YES,999), /* ACCUMULATE DATA SET MESSAGES */
// DATACK=BLOCK, /* BLOCK DATA CHECKS */
// TRACE=NO /* BUILD INTERNAL TRACE @H3C*/
// PRT277 ENDCNTL
The TCP/IP Profile dataset contains statements that define the
parameters used by TCP/IP for MVS address space. The following
parameters have special consideration for PSF and the TCP/IP-
attached IPS printers.
Note: It is not necessary to define the printer in TCP/IP for
MVS, because the IPS acts as a conduit from the MVS system
to the LAN. However, some settings in the TCP/IP Profile
dataset may need to be altered, depending on your current
settings.
DEFINING THE PRINTER TO THE HOST: TCP/IP ATTACHMENT
FONTDD=*.FONT01, /* FONT LIBRARY DD */
/* PRINTER IP ADDRESS */
/* PORT NUMBER */
E-11