Xerox DocuPrint 180 IPS Installation Planning Manual page 72

PRINTER SPECIFICATIONS AND REQUIREMENTS
6-14
Service access The following figure provides space planning information and service
access requirements for the bypass transport from a top view.
Figure 6-8.
1
2
3
4
5
6
7
Bypass transport space planning diagram
Recommended third-party feeder hardware attaches at
rear of 96/4635/180 printer.
Expected third-party input paper feed path
Neutral area, to remain unoccupied
Shaded areas at rear and right side of the bypass transport
require third-party input/output devices to be undockable
from the feeder/stacker or the bypass transport.
Register edge of the output sheet
Third-party hardware must not extend more than 1 inch / 25
mm beyond bypass transport front cover line for correct
front door access.
Bypass transport / input enablement jam clearance space
is required.
XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE