Xerox DocuPrint 180 IPS Installation Planning Manual page 45

Week Activity
-2 Inspect and approve site.
Order consumable supplies. Minimum supplies
needed for installation are:
•
Paper (2 cartons)
•
Developer (1 carton) or
Developer, MICR (1 carton)
•
Fuser agent (2 boxes).
•
Dry ink (1carton). or
Dry ink, MICR (1 carton).
Note: After installation, you will need to
establish a procedure for ordering supplies
according to your ongoing production
requirements.
-1 Schedule operator training.
Define parameters needed to configure PSF for
connectivity to the IPS printer.
Install Make sure supplies are available.
Make sure system administrators are available
during software installation.
Provide host channel address and channel unit
address (if printing via channel).
Provide host IP address.
Sysgen your host to print to an AFP Type 1,
Group 3 printer.
Set up Data Transfer Mode.
Install 96/4635/180 IPS printer hardware and
software.
Have operators available for training.
Check documentation and software kits for
completeness.
Have test jobs ready to run.
Provide stocks needed for default input
configuration
Provide parameters needed to configure PSF
for connectivity to the IPS printer.
XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE
Table 4-1.96/4635/180 IPS installation planning checklist
(continued)
Reference
Chapter 4,
Appendix A, and
sales rep.
5R161
5R573
8R2955
6R206
6R819
Systems analyst
(U.S.) or site
representative
(non-U.S.)
Appendix D and E Customer
Chapter 4 and
Appendix A
Appendix D and E Customer
Appendix B
Appendix D or E
PREPARING FOR INSTALLATION
Date
Responsibility completed
Xerox ________
Customer and Xerox ________
Customer and Xerox ________
________
Customer ________
Customer ________
Customer ________
________
Customer and Xerox ________
Customer and Xerox ________
Xerox ________
Customer ________
Customer ________
Customer ________
Customer ________
Customer ________
4-5