Xerox DocuPrint 180 IPS Installation Planning Manual page 84

PRINTER SPECIFICATIONS AND REQUIREMENTS
Turning radius for printer with
separated components
6-26
The 96, 4635 or 180 is delivered with the printer, inverter feeder/
stacker, and each feeder/stacker as separate modules. If necessary,
the printer can be separated into two pieces for ease in moving. The
larger of the two parts contains the xerographic system; the smaller
of the parts (the paper handling module, or PHM) contains paper
trays 1 and 2. Do not confuse these two parts of the printer with the
inverter and feeder/stacker modules, which have their own turning
requirements.
The following table lists the turning requirements for the printer
without the PHM (separated).
Table 6-7. Turning radius for printer (separated)
Passage or doorway A width
29 inches / 73.7 cm
30 inches / 76.2 cm
31 inches / 78.7 cm
32 inches / 81.3 cm
34 inches / 86.4 cm
36 inches / 91.4 cm
38 inches / 96.5 cm
40 inches / 101.6 cm
42 inches / 106.7 cm
The following table lists the turning requirements for the printer if it is
upended for easier moving or stair-climbing. This table reflects
requirements for the printer separated from the PHM.
Table 6-8. Turning radius for printer (separated and upended
on dolly)
Passage or doorway A width
30 inches / 76.2 cm
31 inches / 78.7 cm
32 inches / 81.3 cm
34 inches / 86.4 cm
36 inches / 91.4 cm
38 inches / 96.5 cm
40 inches / 101.6 cm
42 inches / 106.7 cm
XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE
Minimum passage B width
74.5 inches / 189.2 cm
64.5 inches / 163.8 cm
62 inches / 157.5 cm
59.5 inches / 151.1 cm
56 inches / 142.2 cm
53 inches / 134.6 cm
50 inches / 127 cm
48 inches / 121.9 cm
45.5 inches / 115.6 cm
Minimum passage B width
49 inches / 124.5 cm
43 inches / 109.2 cm
41 inches / 104.1 cm
37.5 inches / 95.3 cm
35 inches / 88.9 cm
33.5 inches / 85.1 cm
32 inches / 81.3 cm
31 inches / 78.7 cm