Ips User Interface Screen - Xerox DocuPrint 180 IPS Installation Planning Manual

CONTROLLER COMPONENTS AND OPTIONS

IPS user interface screen

2-8
Mouse The mouse is another main method of communicating with the
printer. The mouse has three buttons. The left and right buttons are
used to select IPS functions. The center button provides additional
functions that you will not be required to use. If your workstation has
an optical mouse, it must remain on its designated metallic pad to be
active. If the mouse has a roller ball instead of an optical sensor
underneath, it requires a non-metallic pad.
Note: Printer controller hardware configurations are subject to
upgrade.
The graphical user interface allows you to interact with the printer
and to monitor its interaction with the various components. During a
print job, printer error messages may display to notify you of any
unexpected conditions.
Note: The following figure shows the user interface screen with the
main window for a 96 MICR IPS. The main windows for the 180 IPS
and the 4635 IPS are identical to this one, except that they do not
display the MICR On/Off field in the Control Unit Configuration
section (upper-right corner). The 4635 MICR IPS and 180 MICR IPS
main windows differ only in the number of output bin icons they can
display in the Output section.
XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE