Xerox DocuPrint 180 IPS Installation Planning Manual page 85

Turning radius for unseparated
printer components
Turning radii for feeder/stacker
XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE
The following table lists the turning requirements for the printer when
attached to the paper handling module (not separated).
Table 6-9.
Passage or doorway A width
29 inches / 73.6 cm
30 inches / 76.2 cm
31 inches / 78.7 cm
32 inches / 81.3 cm
34 inches / 86.4 cm
36 inches / 91.4 cm
38 inches / 96.5 cm
40 inches / 1,01.6 cm
42 inches / 1,06.7 cm
The following table lists the turning requirements for the inverter
modules feeder/stacker module.
Table 6-10.
Passage or doorway A width
29 inches / 73.7 cm
30 inches / 76.2 cm
31 inches / 78.7 cm
32 inches / 81.3 cm
33 inches / 83.8 cm
34 inches / 86.4 cm
35 inches / 88.9 cm
36 inches / 91.4 cm
37 inches / 94 cm
38 inches / 96.5 cm
39 inches / 99.1 cm
40 inches / 101.6 cm
41 inches / 104.1 cm
42 inches / 106.7 cm
43 inches / 109.2 cm
Note: These turning figures are based on inverter/feeder/stacker
dimensions of 28 inches / 711 mm by 42 inches / 1,067 mm.
PRINTER SPECIFICATIONS AND REQUIREMENTS
Turning radius for printer (not separated)
Minimum passage B width
83 inches / 210.8 cm
76 inches / 193 cm
73 inches / 185.4 cm
70.5 inches / 179.1 cm
66.5 inches / 169 cm
63.5 inches / 161.3 cm
61.5 inches / 156.2 cm
58 inches / 147.3 cm
55 inches / 139.7 cm
Turning radius for inverter feeder/stacker
module
Minimum passage B width
43 inches / 109.2 cm
41 inches / 104.1 cm
40 inches / 101.6 cm
38 inches / 96.5 cm
37 inches / 94 cm
36 inches / 91.4 cm
35 inches / 88.9 cm
34 inches / 86.4 cm
33 inches / 83.8 cm
32 inches / 81.3 cm
31 inches / 78.7 cm
31 inches / 78.7 cm
30 inches / 76.2 cm
29 inches / 73.7 cm
29 inches / 73.7 cm
6-27