Printer Control Console - Xerox DocuPrint 180 IPS Installation Planning Manual

PRINTER COMPONENTS AND OPTIONS

Printer control console

3-2
Refer to the System Overview manual for a detailed description of
the features and operation of the printer components.
The printer control console is the color monitor located on top of the
printer. It contains message areas and graphic displays that alert you
to paper jams and other fault and status conditions (such as low dry
ink). It also contains buttons which allow you to control certain
functions of the printer (for example, continuing an interrupted job)
without returning to the workstation controller.
The printer control console has the following features:
•
Local controls and displays for jam clearance, paper loading/
unloading, and diagnostics/service (used by the service
representative). Two types of messages are displayed on the
printer control console: fault messages, which relate to printer
malfunctions, and information messages, which relate to printer
conditions such as low dry ink.
•
Touch-sensitive areas that allow you to select options by
touching the printer control console screen. A tone sounds
when you touch one of these areas.
•
Attention alarm tone consisting of three beeps, repeated for
ten seconds. The alarm is generated by any event that stops
the printer and requires operator attention. The alarm may be
disabled by the operator.
The tone stops after three cycles, or when the fault condition is
cleared or clearing has started (for example, doors or covers
specified in the clearance instructions are opened). You can
stop the tone by pressing one of the printer control console
buttons or by selecting a function through the touch screen.
XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE