Printer Configurations - Xerox DocuPrint 180 IPS Installation Planning Manual

PRINTER COMPONENTS AND OPTIONS

Printer configurations

3-4
The 96, 4635, and 180 systems are available in different basic
configurations, illustrated below.
These configuration options allow you to customize your Xerox
DocuPrint 96/4635/180 printers for increased efficiency and for
specialized applications.
•
Each of the 4635 and 180 configurations can have the optional
7 by 10-inch enablement kit, producing 154 pages per minute
on the 4635 printer and 206 pages per minute on the 180
printer. (The 7 by 10-inch kit is not available for the 96 printer.)
•
The following configurations may have the optional bypass
transport and/or the input enablement kit added. (Refer to
"Bypass transport printer configurations," later in this chapter.)
— Inverter feeder/stacker only (96 only)
— Inverter feeder/stacker + feeder/stacker
— Inverter feeder/stacker + feeder/stacker + feeder/stacker
(4635 and 180 only)
Figure 3-3. 96 printer—Inverter feeder/stacker only
Note: This configuration is available on the 96 and 96 MICR
only.
Figure 3-4. 96/4635/180 printer—Inverter feeder/stacker +
feeder/stacker
XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE