Xerox Responsibilities - Xerox DocuPrint 180 IPS Installation Planning Manual

Responsibilities

Xerox responsibilities

XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE
4. 4Preparing for installation
This chapter assists you in preparing for the installation of your Xerox
DocuPrint 96/4635/180 IPS and 96/4635/180 MICR IPS.
Preparing for installation is a responsibility shared by personnel at
your site and Xerox. Your service representatives are available to
discuss installation issues and to assist you in completing the site
installation tasks.
Prior to installation, you must select and prepare an appropriate
location for the printer and order supplies. This chapter helps you
accomplish these tasks by providing the following information:
•
A summary of your responsibilities and those of your Xerox
service representative
•
A checklist of installation planning activities.
•
Connectivity requirements for setting up the IPS to receive data
from the IBM host.
For information on controller power and space requirements, refer to
the "Controller specifications and requirements" chapter of this guide.
For facts about printer power and space requirements, refer to the
"Printer specifications and requirements" chapter of this guide.
This section describes your site responsibilities and the
responsibilities of your service representatives. Included are some
joint responsibilities.
This section lists the responsibilities of the service representatives
and system analysts prior to, during, and after installation:
•
Site selection
— Assist in site selection
— Inspect and approve the site.
•
Installation
— Schedule the delivery of the hardware
— Monitor installation activities
— Assist you in ordering any supplies required
— Configure system parameters.
— Assist with the entry of DFA personality profiles for use with
third-party feeding or finishing devices.
4-1