Paper Management; Setting Default Paper Type And Color; Enabling Required Paper Policies; Setting Paper Size Preference - Xerox WorkCentre 7800 series Administrator's Manual

Printing

Paper Management

Setting Default Paper Type and Color

You can specify the default settings for paper type and color.
Note: After you set the initial default settings, changes made on this tab do not affect the paper
type and color.
®
1. In Xerox CentreWare
2. Under Paper Type and Paper Color, select the default paper type and color.
3. Click Apply.

Enabling Required Paper Policies

You can enable or disable the nearest match and paper size replacement.
®
1. In Xerox CentreWare
2. Click the Required Paper Policies tab.
For Nearest Match, select Enabled.
3.
4. For Replace 8.5 x 14", select Enabled.
5. For Jobs Held for Required Paper, select an option.
Click Apply.
6.

Setting Paper Size Preference

Use Paper Size preference to control how paper sizes appear on the screen in inches or millimeters. The
selected preference appears first on the Paper Size screen. This setting also affects the custom size units
for the paper tray.
®
1. In Xerox CentreWare
2. Click the Paper Size Preference tab.
3. Select an option:
Inches sets the paper size preference to inches.
−
− Metric sets the paper size preference to millimeters.
Click Apply.
4.
®
138 Xerox WorkCentre
System Administrator Guide
®
Internet Services, click Properties > General Setup > Paper Management.
®
Internet Services, click Properties > General Setup > Paper Management.
®
Internet Services, click Properties > General Setup > Paper Management.
®
7800/7800i Series Color Multifunction Printer