Type Of Network; Geographical Settings; Country; Telecommuncation Network - Xerox Phaser 3100MFP/X User Manual

Phaser 3100MFP/X

Type of network

You can connect your fax to either a PSTN or a private
network such as private automatic branch exchange
(PABX). You must select the network which is the most
convenient.
To select the type of network:
251 - SETUP / TEL. NETWORK / NETWORK TYPE
1 Press , enter 251 using the keypad.
2 Select option PABX or PSTN then confirm your
choice with OK.
3 To exit this menu, press
If you are connecting your machine to a private network,
behind a company's PABX, you may need to specify a
local prefix (see Local prefix).

Geographical settings

These settings will enable you to use your machine in
different preset countries using different languages.

Country

By choosing a country, you initialise:
• the settings for the public telephone network,
• the language by default.
To select the country:
201 - SETUP / GEOGRAPHICAL / COUNTRY
1 Press , enter 201 using the keypad.
2 Select the required option and press the OK key to
confirm.
3 To exit this menu, press
If none of the options in the list is
Important
suitable, select the "OTHER" option.

Telecommuncation Network

This setting enables you to manually set the type of public
telephone network (PSTN) for a country, so that your
machine can communicate over the public telephone
network in compliance with the applicable standards.
By default, setting a country using the
command automatically sets the type of PSTN to use
in the selected country.
These settings are different from the
NETWORK TYPE, which allows you
Important
to choose between public and
private network.
To manually select the type of public telephone network:

Language

.
This setting enables you to choose the menu language of
your choice. By default, the machine is set to English.
To select the language:

Local prefix

This function is used when your fax is connected to a
private network, behind a company's PABX. It allows you
to program an additional automatic local prefix (to be
defined), enabling you to automatically
company's telephone network system, but only under
certain conditions:
•
.
•
Programming your fax with the local prefix consists of two
steps:
201
- 37 -
202 - SETUP / GEOGRAPHICAL / NETWORK
1 Press , enter 202 using the keypad.
2 Select the required option and press the OK key to
confirm.
3 To exit this menu, press
If none of the options in the list is
Important
suitable, select the "OTHER" option.
203 - SETUP / GEOGRAPHICAL / LANGUAGE
1 Press , enter 203 using the keypad.
2 Select the required language using
press the OK key to confirm.
3 To exit this menu, press
the company's internal numbers, where a prefix is not
required, must be short numbers less than the
minimal size (to be defined, for example France has
10 digits),
the outside numbers requiring a prefix, must be long
numbers greater or equal to the minimal size (to be
defined, for example France has 10 digits).
1 defining the minimal size (or equal) of the
company's outside numbers,
2 defining the outgoing local prefix of the company's
telephone network. This prefix will automatically be
added as soon as an external number is dialled.
If you define a local prefix, do not
add it to the numbers stored in
Important the directory,
automatically dialled with each
number.
252 - SETUP / TEL. NETWORK / PREFIX
1 Press , enter 252 using the keypad.
.
and , then
.
exit the
it will be