Xerox Phaser 3100MFP/X User Manual page 71

3 Check the Duplex box and choose among the two
binding modes:
Binding mode
Long sides
Short sides
4 Click on the OK button to begin printing.
5 The machine prints the odd pages (from the higher
odd page to page 1) and the LCD screen displays:
** PRINTING **
** PC **
6 Once the odd pages are printed, the LCD screen
displays the message **P
THE PAPER TRAY WITH THE PRINTED SIDE VISIBLE
** PUT THE PRIN
... AND PRESS <OK>
The PC generates and prints a page
explaining how to reload the sheets
for a duplex job. Read this page
carefully and place it back with the
Important
other sheets.
it is very important that you return
the explanation sheet to the paper
tray to continue printing correctly.
7 Place the sheets in the paper tray as indicated on
the explanation page and below.
The following illustrations describe the necessary
operations depending on the selected binding
mode:
Printing
UT THE PRINTED SHEETS IN
...:
- 66 -
• Long sides
• Short sides
8 Press OK on the control panel to resume printing.
9 Even pages are printed on the other side of the
sheets. Once all pages are printed, remove the
explanation sheet.
If a paper jam or a paper size error
Important occurs, the job is cancelled. You
must then resubmit the print job.
Phaser 3100MFP/X