Zoom Setup; Collated Copy Setup; Scanned Original Setup; Contrast Setup - Xerox Phaser 3100MFP/X User Manual

according to the following table:
Parameter
AUTO Low resolution.
Standard resolution for
TEXT documents containing text and
graphics.
Optimal resolution for
PHOTO documents containing
photographies.
QUALITY Optimal resolution for
TEXT documents containing text.
3 Confirm your choice by pressing the OK button.
4 Exit this menu by pressing the
You can also change the resolution by
Note
pressing the

Zoom setup

The ZOOM parameter allows you to reduce or enlarge an
area of a document by choosing the origin and the zoom
level to apply to the document, from 25 to 400 %.
842 - ADVANCED FCT/COPY/ZOOMING
1 Press , enter 842 using the keypad.
2 Enter the desired
alphanumerical keypad
predefined values with the buttons
3 Confirm your choice by pressing the OK button.
4 Exit this menu by pressing the

Collated copy setup

The COLLATED parameter gives you the option of
having your output collated or uncollated.
843 - ADVANCED FCT/COPY/COLLATED
1 Press , enter 843 using the keypad.
2 Select the desired option with the buttons
according to the following table:
Parameter
The printer assembles the copies of
the original document.
E.g.: Select collated for output
COLLATED
stacked in sets to match the
sequence of the originals, i.e. (1,2,3/
1,2,3).
The printer does not assemble the
copies of the original document.
UNCOLLATED
E.g.: Select uncollated for output
sorted into stacks of individual
pages, i.e. (1,1,1/2,2,2/3,3,3).
Description Icon
none
button.
button.
zoom level with
or choose among
and .
button.
and
Description
3 Confirm your choice by pressing the OK button.
4 Exit this menu by pressing the

Scanned original setup

If you want, you can change the origin of the scanner.
By entering new values for X and Y in mm (X < 209 and
Y < 280), you move the scanned area as shown on the
diagram below.
844 - ADVANCED FCT/COPY/ORIGIN
1 Press , enter 844 using the keypad.
2 Select the X and Y coordinates with the buttons
or .
3 Setup the desired coordinates with the numerical
keypad or the buttons
4 Confirm your choice by pressing the OK button.
5 Exit this menu by pressing the

Contrast setup

the
The CONTRAST parameter allows you to choose your
output's contrast.
845 - ADVANCED FCT/COPY/CONTRAST
1 Press , enter 845 using the keypad.
2 Setup the desired level of contrast with the buttons
and .
3 Confirm your choice by pressing the OK button.
4 Exit this menu by pressing the

Brightness setup

The BRIGHTNESS parameter allows you to lighten or
darken your output.
846 - ADVANCED FCT/COPY/BRIGHTNESS
1 Press , enter 846 using the keypad.
2 Setup the desired brightness with the buttons
and .
3 Confirm your choice by pressing the OK button.
4 Exit this menu by pressing the
- 26 -
Phaser 3100MFP/X
button.
and .
button.
button.
button.