Security Directives - Xerox Phaser 3100MFP/X User Manual

Xerox printer/fax/scanner/copier quick user guide
Hide thumbs Also See for Phaser 3100MFP/X:
Table of Contents

Advertisement

Phaser 3100MFP/X

Security directives

Before turning on your device, check that the outlet that you are going to plug it into conforms to the indications shown
on the information plate (voltage, current, power network frequency) located on your device. This device shall be
connected to a single phase power network. The device shall not be installed on bare ground.
Batteries and rechargeable batteries, packaging and electric and electronic equipment (EEE), shall be thrown away,
as specified by the Instructions of the ENVIRONMENT chapter of this manual.
Because of the device model, the power connector is the only way to disconnecting the device from the power network,
that is why it is imperative to apply the following safety measures: your device shall be connected to a power outlet
located nearby. The outlet shall be easily accessible.
Your device is delivered with a grounded power cord. It is imperative to connect a grounded connector to a grounded
outlet connected to the building earthing.
For installation conditions and safe use precautions, refer to chapter Installation, page 13.
Repairs-maintenance: Repairs and maintenance should only be carried out by a
qualified technician. There are no serviceable parts inside the machine. To reduce
the risk of electrical shock, you shall not proceed with these operations yourself,
because by opening or removing the covers, you could expose yourself to two
hazards:
- The laser beam can cause irreversible eye damage.
- Avoid contact with powered parts because it can lead to electrical shock with
unfortunate consequences.
- 9 -

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

3100mfp/s - phaser b/w laser

Table of Contents