Printing The Functions Guide; Printing The Logs - Xerox Phaser 3100MFP/X User Manual

Phaser 3100MFP/X
Parameter
Transmission speed for incoming
11 - RX speed
documents.
For a quality telephone line
(compatible, no echo),
communications occur at
maximum speed.
However, it may be necessary to
restrict the transmission speed for
some calls.
12 - Rings Number of rings to automatically
start your machine.
13 - Discard size The Discard Size parameter only
defines the printing of received
faxes. The number of lines of a
document can be too high for the
paper size loaded. This parameter
defines the threshold beyond
which the extra lines are printed on
a second page. Below this
threshold, extras lines are deleted.
If you choose ON, the threshold is
set on 3 centimeters.
If you choose OFF, the threshold is
set on 1 centimeter.
20 - E.C.M. This parameter helps correct the
calls made on disturbed telephone
lines. It is used when the lines are
weak or too noisy. Transmission
times may be longer.
25 - TEL Impedance This parameter lets you choose
between a complex impedance
and a 600 Ohm impedance,
depending on the telephone
network your machine is
connected to.
Makes printing lighter to save toner
80 - Toner save
cartridge ink.
90 - RAW Port RAW network print port
connection.
91 - Printer error Time-out before document being
timeout
printed is deleted following a print
error in PC print mode.
92 - Printer wait Wait time-out for data from PC
timeout
before the task is deleted in PC
print.
93 - Replace format Page size change. This parameter
allows you to print a LETTER size
document on A4 pages using the
LETTER/A4 setting.
96 - NBR. WEP Number of WEP keys allowed
Keys
(from 1 to 4).
Description
- 41 -

Printing the functions guide

Printing is not possible on A5 (or
Important
Statement) paper size.
51 - PRINT / FUNCTIONS LIST
Press , enter 51 using the keypad.
The printing of the functions guide starts.
You can also access the PRINT menu
Note
by pressing the

Printing the logs

Printing is not possible on A5 (or
Important
Statement) paper size.
The incoming and outgoing logs list the last 30
transmissions (incoming and outgoing) made by your
machine.
An automatic print out will take place after every 30
transmissions. However, you may request a print out at
any time.
Each log (incoming or outgoing) contains a table with the
following information:
• date and time of the incoming or outgoing document,
• subscriber's number or E-mail address,
• transmission mode (Normal, Fine, SFine or Photo),
• number of pages sent or received,
• call duration,
• incoming or outgoing results: noted CORRECT if
properly transmitted,
or
information codes for special calls (polling, manual
subscribers, etc.)
• reason for call error (example: your subscriber does
not answer).
To print the logs:
Press , enter 54 using the keypad.
The printing of the logs starts. The incoming and outgoing
logs are printed on the same page.
You can also access the PRINT menu
Note
by pressing the
button.
54 - PRINT / LOGS
button.