Received Faxes Reduction Mode; Technical Parameters - Xerox Phaser 3100MFP/X User Manual

Received faxes reduction mode

This menu allows you to reduce received faxes for
printing. This adjustment can be automatic or manual.
Automatic mode:
This mode automatically resizes received faxes.
To set automatic mode:
246 - SETUP / RECEPTION / REDUCTION
1 Press , enter 246 using the keypad.
2 Select AUTOMATIC and confirm with OK.
3 To exit this menu, press
Manual mode:
The machine offers a 70 to 100 % reduction. Outside
these values, the machine beeps for an error. This fixed
reduction will be used when printing received faxes,
regardless of the size of the paper loaded in the tray.
To set the manual mode:
246 - SETUP / RECEPTION / REDUCTION
1 Press , enter 246 using the keypad.
2 Select FIXED and confirm with OK.
3 Enter the reduction value (between 70 and 100)
and confirm with OK.
4 To exit this menu, press

Technical Parameters

As delivered your machine is preset by default. However,
you may adjust it to meet your requirements by resetting
the technical parameters.
To set the technical parameters:
1 Press , enter 29 using the keypad.
2 Select the desired parameter and confirm with OK.
3 With the keys
settings by following the table below and press OK.
.
.
29 - SETUP / TECHNICALS
or , modify the parameter
Parameter
1 - Scanning mode Default value of the scan mode
resolution for the documents to be
transmitted.
Important: this parameter is by
2 - TX header
default activated on the US model
and cannot be modified.
If this parameter is on, your header
will appear on all documents sent
to your subscribers with your
name, number, date and number
of pages.
Warning: If you send a fax from
the automatic document feeder,
the transmission header will not
appear on the document your
correspondent receives.
Transmission speed for outgoing
3 - TX speed
documents.
For a quality telephone line
(compatible, no echo),
communications occur at
maximum speed.
However, it may be necessary to
restrict the transmission speed for
some calls.
If this parameter is on, the on-line
4 - Echo protect
echo will be reduced during long
distance calls.
For some long distance calls
6 - EPT mode
(satellite), the on-line echo may
disturb the call.
7 - COM. display Choice between transmission
speed displayed or number of the
page in progress.
8 - Eco energy Choosing the printer standby
delay: the printer will switch to
standby after a delay (in minutes)
of NON-operation or during the
period of time of your choice.
Note: you can also access this
parameter by pressing the
If this parameter is on, all
10 - RX header
documents received by your fax
will include the subscriber's header
with his/her name, number (if
available) fax print date and the
page number.
- 40 -
Phaser 3100MFP/X
Description
key from the idle screen.