Line Monitor Default Setting - Xerox 665 System Administrator Manual

WorkCentre Pro 665/685/765/785

Line Monitor Default Setting

Enable this feature to listen to the initial call sequence during all send
and polling operations. To enable this feature for a single operation,
refer to "Listen to Dial in chapter 5".
To set the Line Monitor feature:
1. Press:
Menu
2. Select the Line Monitor option:
To enable the Line Monitor feature, press
To disable the Line Monitor feature, press
3. The menu selection screen redisplays. Press Exit or Stop to
return to the Standby Mode.
*** Menu item numbers may vary according to configurations.
Programming the Machine
***
Line monitor
1. Always
2. Off
.
.
2-63