June 9, 2004
Type, and Color
This document applies
WC Pro 32/40 Color
WC Pro 65/75/90
WC Pro 35/45/55
Xerox Multifunction Devices
PDL Reference Guide for the
WorkCentre Pro 65/75/90
Accessing Extended Features
This document contains information to help you access the extended features of a
WorkCentre Pro 65/75/90 in environments that do not have a custom driver. These include
the following environments:
Custom DOS packages
Other platforms (including mainframes and minis)
Some of the commands and syntax used in this document requires familiarity with either
PostScript (PS) or Printer Command Language (PCL). This document provides the Printer
Description Language (PDL) commands and syntax for each feature. The following items are
A table that describes features supported by the WorkCentre Pro 65/75/90.
A PostScript table that describes the PostScript features and syntax the WorkCentre Pro
A PCL table, that describes the PCL features and syntax the WorkCentre Pro 65/75/90
This document is not intended to be a complete PS or PCL reference manual; use it as a
guide for using the PS and PCL commands for the WorkCentre Pro 65/75/90.
Refer to these additional reference materials PostScript Language Reference Manual, 2
Edition, ISBN 0-201-18127-4 and PCL 5 Printer Language Technical Reference Manual,
Hewlett-Packard Manual Part Number 5021-0377.
Using this Guide
1. Search the Feature Table to determine whether the feature you wish to use is
2. Verify that the feature is supported by the platform. For example, the WorkCentre
Pro 65/75/90 must have the Finisher option installed to use stapling commands.
3. Follow across the table to find the syntax listed for the PDL examples shown. Read the
... for the user